Crane 4-in-1 TRUE HEPA Cool & Warm Mist Humidifier, UV Air Purifier & Aroma Diffuser (with REMOTE)
 
Recommended non-medicated alternative to over-the-counter cough and cold medicine.
Relieves cough, cold, and flu symptoms, as well as nasal congestion, dry cough, sinus irritation, nose bleeds, and dry skin and hair.
Ultrasonic cool mist increases moisture in the air for easier breathing and for a goodnight’s sleep.
WARM MIST– Relieves coughs & colds caused by cold, dry. Neutralizes airborne bacteria, mold spores, and viruses.
COOL MIST– Helps keep nasal passages, sinuses, and skin hydrated in hot, dry weather.
The auto-Off function activates when the water tank is empty.
GERMICIDAL – UV LIGHThelps reduce viruses, bacteria, fungi, mildew, and mold spores.
PROTECTION– True-Hepa removes up to 99.95% of airborne particles and germs.
ULTRA-EFFICIENT, LONG-LASTING DESIGN– The Crane – 4-IN-1 True-Hepa Humidifier – Warm & Cool Mist is the best of the best. Equipped with a large 1.3 galloon, 360-degree rotatable nozzles, and dual mist output with night light feature.
AREA COVERAGE: 50 sq.m.
WASHABLE PARTICLE FILTER– Which effectively removes limescale & heavy metal ions in hard water allowing cleaner, finer & safer mist spraying.
1 Year Product Warranty
AROMA TRAY(for use with your favorite essential oils)
With Remote Control
Item Dimensions: L-25cm x W-22cm x H-33cm Weight: 2.39kg
Packaging Dimensions: L-28.2cm x W-21.3cm x H-41cm Weight: 3.05kg
 
TECHNICAL SPECIFICATIONS
Rating Voltage: 220-240 V
Frequency: 50-60Hz
Noise: <37 decibels from 3 ft away
Power: 105W
Water Tank Capacity: 5 Liter/ Approx. 1.3 gallons
Run Time Per Tank: Up to 24 Hours
Humidifying Capacity: Warm Mist humidity capacity >400ML/H
Cool Mist humidity capacity >300ML/H
 
 
ASSEMBLY & USE
ALWAYS use fresh cool water when operating the humidifier.
 
1. Turn Water Tank upside down, unscrew Water Tank Cap and fill with cool water only.
ALWAYS HOLD WATER TANK WITH TWO HANDS WHEN FULL.
DO NOT fill water all the way to the rim.
DO NOT use hot water.
DO NOT add any medication, essential oils, or salt to the water tank. (Essential oils
should only be used in the aroma pad.)
DO NOT pour water into Mist Outlet Channel.
 
2. Screw Water Tank Cap back onto Water Tank and turn the tank over to place on
Humidifier Base, making sure it fits together securely. Please note if the water tank is
not properly placed on the humidifier base it will not turn on.
Note: Do not attempt to move the humidifier while Water Tank is placed on the
Humidifier Base. Doing so may cause leakage of water and/or Humidifier Base to
overfill.
 
3. Power: Plug the power cord in and press the power icon to turn power on and off. When
power is on, cool mist will begin to rise from the mist lid at the highest mist level
setting.
Note: When the power is on the icon will be blue
 
4. Warm Mist Option: Press the droplets icon to select the warm mist function. It may take 5-10
minutes for the water to warm up)
Note: A blue light will be on when the Warm Mist is on
 
5. UV Mode: Press the UV icon to turn on UV, then press again to turn off UV.
Note: A blue light will be on when UV light is on.
 
6. Sleep Mode: Press the UV icon for 3 seconds to turn the display icons off. Press any
button to de-activate the Sleep Mode setting.
 
7. Mist Setting: Press the steam icon to change the mist output from low or high. The
humidifier always starts at high when powering on, to change to low press once.
Note: The high setting will light up blue and the low setting will light up purple.
 
SET THE CORRECT HUMIDITY OUTPUT: To reduce excessive humidity or condensation
especially in small rooms, leave the room door open and adjust mist intensity to
low with the Mist Setting Icon.
NOTE: As a safety feature, when the humidifier runs out of water it will beep three times
and power off. Unplug the unit before removing and refilling the water tank.
 
AROMA TRAY
To use the Aroma function, add essential oils to the included pad (or with any
compatible scent pad) as desired. Replace pad before running humidifier. Remove
scent pad and clean out tray when not using the aroma tray.
 
 
HEPA FILTER
To open the filter compartment door, press the up symbol
 
Level 1: Washable Particle Filter
The purpose of this filter is to capture initial dust and
allergen particles. It helps extend the life of the HEPA filter
by removing large particles before they can get to the
HEPA filter. You will find visible dust, hair, and lint in the
particle filter. By keeping the particle filter clean, you can
dramatically extend the life of your HEPA filter and
improve the overall efficiency of your air purifier.
 
Level 2: HEPA Filter
HEPA stands for High Efficiency Particulate Air. The inlet
grill of your air purifier draws in dirty air. Crane’s air purifier
HEPA filter removes at least 99.97% of all particles as small
as 0.3 microns. Microns are used to measure the size of
these microscopic airborne particles.
Allergens such as pollen, smoke, animal dander, mold
spores, and dust get trapped in the HEPA filter.
 
Level 3: Active Carbon Filter
The Active Carbon Filter (behind the HEPA filter) captures
particles as well as absorbs common household odors
caused from tobacco, pets, garbage and cooking.
 
CLEANING THE WASHABLE PARTICLE FILTER:
1. Gently remove the particle filter.
2. Rinse the particle filter by hand using only warm water.
DO NOT place in dishwasher.
DO NOT use hard solvents or detergents.
3. Particle filter MUST be thoroughly dry before placing it back in the unit.
Note: HEPA Filter should be cleaned once a month by a vacuum cleaner